150ml can of undercoat spray. Please provide a contact telephone number to enable a smooth courier delivery.
Due to UK postage restrictions, sprays are despatched via courier. Any quantity of cans ordered, up to a maximum of 10, incurs a £6.50 postage charge. Please select Interlink in the shopping cart.
Please note that we will not deliver to any part of the UK that incurs additional charges from the courier (e'g' Isle of Man, Highlands, N Ireland) without prior contact and confirmation of the actual shipping cost. Delivery to N. Ireland is £13.50, Scottish Islands is £15, for example.
You MUST include a telephone number to enable smooth delivery. Please select Interlink in the shopping cart.
We CANNOT ship this product outside the UK.
Spray with a grey tone especially for priming resin parts featuring a high opacity once dry. This spray primer can be applied directly over metal, is ultra-resistant and with the best adherence.
Clean and degrease the resin parts to be painted. The paint is a synthetic lacquer that cures in a short period of time. Easy to apply, the primer of metal parts will become simple and more effective.
Before using you will need to shake the spray well, at least a minute to get a good mixture. Paint with the can in vertical position in fast and thin coats at a distance of about 25 cm., allowing to dry for 5 minutes between layers. At the end of the painting turn the can upside down holding the spray nozzle for a few seconds in this position, until no more paint comes out of the diffuser, thus avoiding the obstruction of the diffuser.